PRODUCTS

Using single crystal silicon resonant sensor technology.
Suitable for measuring flow, level, density and pressure of liquid, gas or steam.
Output 4~20mA DC current signal.
Can measure static pressure with built-in display or remote monitoring.
Fast response, remote setting, diagnostics and optional pressure alarm output.
Multi-sensor technology provides advanced diagnostic capabilities to detect blockages in the pressure line or abnormalities in the heating system.
FF fieldbus type is available.
The standard EJX series is TÜV certified and meets SIL 2 safety requirements.

Using single crystal silicon resonant sensor technology.
Suitable for measuring flow, level, density and pressure of liquid, gas or steam.
Output 4~20mA DC current signal.
Can measure static pressure with built-in display or remote monitoring.
Fast response, remote setting, diagnostics and optional pressure alarm output.
Multi-sensor technology provides advanced diagnostic capabilities to detect blockages in the pressure line or abnormalities in the heating system.
FF fieldbus type is available.
The standard EJX series is TÜV certified and meets SIL 2 safety requirements.

Measure the level and density of solids or settling liquids.
Measure static pressure with built-in display or remote monitoring.
Fast response, remote setting, diagnostics and optional pressure alarm output.
Multi-sensing technology detects abnormalities such as blockage in the pressure pipeline.
FF fieldbus type is available.
TÜV certified and meets SIL 2 safety requirements.

Measure the level and density of solids or settling liquids.
Measure static pressure with built-in display or remote monitoring.
Fast response, remote setting, diagnostics and optional pressure alarm output.
Multi-sensing technology detects abnormalities such as blockage in the pressure pipeline.
FF fieldbus type is available.
TÜV certified and meets SIL 2 safety requirements.

Design: Two pressure ports—positive and negative.
Measurement: Operates by comparing pressures at these ports.
Use: Suitable for differential pressure applications.

Specifications: Standard accuracy ± 0.08 in. (± 2 mm), extra accuracy ± 0.04 in. (± 1 mm)
Measuring range 131 ft (40 m), Rosemount 5408:SIS 82 ft (25 m) in safe mode
Working pressure 1450 psi (100 bar)
Operating temperature -76 to +482 °F (-60 to +250 °C)
Power Supply 4-20mA/HART: 12-42.4 VDC (Intrinsically Safe Installation 12-30 VDC), Foundation™
Fieldbus: 9-32 VDC (Intrinsically Safe Installation 9-30 VDC, FISCO 9-17.5)
Communication protocol 4-20mA HART® (two-wire loop power supply), Foundation™ fieldbus
Certifications ATEX, IECEx, FM, CSA, 3-A and CRN
IEC 61508 certification for safety up to SIL2
Spill protection TÜV tested and WHG certified
Antenna Type Conical Antenna, Process Sealed Antenna, Parabolic Antenna

Suitable for liquid level measurement.
Cost effective and reliable.
No moving parts and no calibration required.
The influence of process conditions is small.
Supports top-down liquid level measurement and interface measurement.
Operating pressure range: full vacuum to 580 psi.
Operating temperature range: -40 to 150°C.
Communication protocol: 4-20 mA/HART™, Modbus®.
Multiple probe types.

Installation: The product can be installed directly or used with Tuned-System™ components.
Warranty: Offers a 5-year limited warranty.
Maximum Working Pressure: The product can handle up to 300 psi (20.68 bar).
Temperature Range: It operates within a temperature range from -105°C (-157°F) to 205°C (401°F), depending on the fill fluid used.
Communication Protocols: Compatible with various protocols including 4-20 MA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS® PA, and 1-5 V low power HART®.
Seal System: Features a direct mounting system.

Multiple process connections, materials and output protocols
Specifications: Maximum operating pressure 300psi, process temperature range -157°F to 401°F
Communication protocols: 4-20mA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS®, 1-5V Low Power HART®
Transmitter connections: welded, serviceable process connections, flanged
Process wetted materials: 316L SST, Alloy C-276, Tantalum
Diagnostics Basic Diagnostics Certifications: SIL 2/3 certification based on IEC 61508, NACE® certification, hazardous location certification

Application: Suitable for measuring corrosive environments like waste acids and alkalis.
Limitations: Not for use with foamy media or in settings where liquid levels exceed five meters or solid levels exceed two meters.
Types: Available in standard and explosion-proof variants; standard for water treatment, explosion-proof for chemical industries.
Safety: Suitable for use in explosion-proof areas for gas and dust.
Functionality: Features a linearization function that adjusts measurements to any unit of length, volume, or flow.
Installation: Installable via G1½" or 1½NPT threads.
Temperature Sensor: Includes a built-in sensor that compensates for temperature-related speed of sound variations.

Application: Suitable for measuring corrosive environments like waste acids and alkalis.
Limitations: Not for use with foamy media or in settings where liquid levels exceed five meters or solid levels exceed two meters.
Types: Available in standard and explosion-proof variants; standard for water treatment, explosion-proof for chemical industries.
Safety: Suitable for use in explosion-proof areas for gas and dust.
Functionality: Features a linearization function that adjusts measurements to any unit of length, volume, or flow.
Installation: Installable via G1½" or 1½NPT threads.
Temperature Sensor: Includes a built-in sensor that compensates for temperature-related speed of sound variations.