Flowmeter

Housing: Cast aluminum or CF3M stainless steel casing, NEMA 4X (IP66) protection rating.
Outputs:
Model 1700: Bell 202 HART FO/DO RS485 HART and Modbus, mA output.
Installation: Integral or remote mounting, featuring MVD digital processing technology.
Measurement: Capable of concentration and net flow measurement without additional instruments.
Certifications: SIL2 and SIL3 certification for trade handover.
Field Calibration: Offers on-site verification and online sensor status validation.
Wireless Solution: Supports WirelessHART for additional diagnostics and process information.
Hazardous Area Rating: Classified as Zone 1/Division 1, with optional local operator interface.

Provides high-precision liquid and gas measurement.
Calculate the concentration of miscible or immiscible fluids.
Calculate the fluid viscosity of a Newtonian liquid.
Calculate the energy calorific value of gas measurements.

Few factors affecting measurement
Unobstructed flowing parts
Large nominal diameter range
Novel excitation method
Converter and sensor can be separated
High microprocessor performance
Bidirectional measuring system
Self-test and self-diagnostic functions

SSP technology maintains high accuracy and stability
High reliability and robust design improve factory efficiency
Reduce operating costs and facilitate parameter setting
Clear display, analog/pulse dual output
Alarm output, status output (flow switch)
Stainless steel detector with no moving parts
Signal cable length max. 30 m
Explosion-proof structure: NEPSI

Performance: Offers exceptional flow and density measurement capabilities. Applications: Suitable for liquid, gas, and slurry applications. Reliability and Control: Provides high reliability and control. Reduced Impact: Minimizes process, installation, and environmental impacts. Versatility: Adapts to various pipe sizes and application scopes. Connectivity Options: Supports multiple communication and connection options.
Self-Verification: Features Smart Meter Verification™ for complete, traceable calibration checks.
Calibration Facility: Supported by a world-leading ISO/IEC 17025 calibration facility for high performance.
Smart Sensor Design: Reduces the need for onsite zero calibration.

Stability: The Rosemount 8800 Series Vortex Flowmeters demonstrate excellent stability.
Sealless Design: Featuring a sealless and non-clogging body design, enhancing usability.
Leak Elimination: Capable of eliminating potential leakage points, reducing unexpected process shutdowns.
Isolated Sensor Design: Uniquely designed isolated sensors for easy replacement.
Non-Destructive Sensor Replacement: Allows for the replacement of flow and temperature sensors without disrupting process seals.

Accuracy: 0.15% volumetric flow accuracy (13:1 turndown ratio), 0.25% (40:1 turndown ratio).
Pipe Sizes: Ranges from 15-900mm (½-36in).
Lining Materials: PTFE, ETFE, PFA, polyurethane, etc.
Electrode Materials: 316L stainless steel, nickel alloys, etc.
Flange Ratings: ASME B16.5 150-2500, DIN PN 10-40, AS 2129 Table D, and AWWA C207 Table 3 D.
Submersion Protection: IP68 (recommended with sealed cable glands).
Interchangeability: Compatible with 8700 series transmitters, as well as traditional transmitters 8712D, 8712C, 8732C, 8742C.
Design: Unobstructed design to minimize maintenance and repair needs.

Accuracy: 0.15% volumetric flow accuracy (13:1 turndown ratio), 0.25% (40:1 turndown ratio).
Pipe Sizes: Ranges from 15-900mm (½-36in).
Lining Materials: PTFE, ETFE, PFA, polyurethane, etc.
Electrode Materials: 316L stainless steel, nickel alloys, etc.
Flange Ratings: ASME B16.5 150-2500, DIN PN 10-40, AS 2129 Table D, and AWWA C207 Table 3 D.
Submersion Protection: IP68 (recommended with sealed cable glands).
Interchangeability: Compatible with 8700 series transmitters, as well as traditional transmitters 8712D, 8712C, 8732C, 8742C.
Design: Unobstructed design to minimize maintenance and repair needs.

Housing: Cast aluminum or CF3M stainless steel casing, NEMA 4X (IP66) protection rating.
Outputs:
Model 1700: Bell 202 HART FO/DO RS485 HART and Modbus, mA output.
Installation: Integral or remote mounting, featuring MVD digital processing technology.
Measurement: Capable of concentration and net flow measurement without additional instruments.
Certifications: SIL2 and SIL3 certification for trade handover.
Field Calibration: Offers on-site verification and online sensor status validation.
Wireless Solution: Supports WirelessHART for additional diagnostics and process information.
Hazardous Area Rating: Classified as Zone 1/Division 1, with optional local operator interface.

Few factors affecting measurement
Unobstructed flowing parts
Large nominal diameter range
Novel excitation method
Converter and sensor can be separated
High microprocessor performance
Bidirectional measuring system
Self-test and self-diagnostic functions

Accuracy: 0.15% volumetric flow accuracy (13:1 turndown ratio), 0.25% (40:1 turndown ratio).
Pipe Sizes: Ranges from 15-900mm (½-36in).
Lining Materials: PTFE, ETFE, PFA, polyurethane, etc.
Electrode Materials: 316L stainless steel, nickel alloys, etc.
Flange Ratings: ASME B16.5 150-2500, DIN PN 10-40, AS 2129 Table D, and AWWA C207 Table 3 D.
Submersion Protection: IP68 (recommended with sealed cable glands).
Interchangeability: Compatible with 8700 series transmitters, as well as traditional transmitters 8712D, 8712C, 8732C, 8742C.
Design: Unobstructed design to minimize maintenance and repair needs.